Edge & Separation Elements
On Roofs without a roofing edge it is possible to install a roofing
edge as part of the green roof system. Various profiles and separation
elements are provided by ZinCo Canada Inc. to create the edge profile.
Also various elements for a clean separation between gravel strips,
green areas and pavement are part of ZinCo product line.
ZinCo Eave profile DP 55 - DP 80 - DP 120
 |
ZinCo eave profile DP 55 (55 mm), DP 80 (80 mm) or DP 120 (120 mm) made of aluminum or stainless steel L-bracket. Designed as a profile for flat roofing edges and as gravel retainer. Including vertical slots for drainage, opening for adhesion to the waterproofing membrane (with adhesive tape), butt joints and corner pieces. Size: see product list. Lenght: approx. 3 m. | ||
|
|
Art. Nr. 7777 7779 7778 7792 7793 7781 7784 7783 7794 7795 7785 7788 7787 7796 7797 9500 |
roll approx. 40 m |
|
 |
ZinCo heavy duty eaves profile TRP 80 (80 mm) or TRP 140 (140 mm) made of stainless steel L-bracket. Designed as a profile for sloped roofing edges and as edging between pavement and green areas. Including vertical slots for drainage, openings for adhesion to the waterproofing membrane (with adhesive tape), and attached butt joints. Length: approx. 3 m. | ||
Product TRP 80 Stainless (80 mm) TRP 140 Stainless (140 mm) |
Art. Nr. 7780 7782 |
Size of Delivery Piece Piece |
|
 |
ZinCo support bracket TSH 60 or TSH 100 made of stainless steel. Designed for the installation of the Heavy Duty Eaves profiles for sloped roofs. Maxium load per bracket: TSH 60: 150 kg - TSH100: 300 kg. Length: approx 40 cm. Including 3 - 8 mm screw holes. | ||
Product TSH 60 TSH 100 |
Art. Nr. 9560 9565 |
Size of Delivery Piece Piece |
|
 |
ZinCo gravel retainer KL 55 or KL 85 made of aluminum L-bracket with square slots for drainage. Designed as gravel retainer for gravel strips. Length: approx. 3 m. Including butt joints. | ||
Product KL 55 Aluminum (55 mm) Butt Joint KL 55 KL 80 Aluminum (80 mm) Butt Joint KL 80 |
Art. Nr. 7750 7751 7766 7768 |
|
|
 |
ZinCo separation profile TP 75 made of aluminum with vertical drainage slots and stabilizers. Including reinforced upperside. Length: approx. 2 m. Height: 75 mm. Thickness: 1 mm. Flange width: 30 mm. | ||
Product TP 75 Aluminum (75 mm) |
Art. Nr. 7975 |
Size of Delivery Piece |
|
 |
ZinCo garden edging BE 250 or BE350 made of stainless steel. Desigend as aesthetic edging between green areas and pavement. Height: 250 mm or 350 mm. Length: approx. 2.50 m | ||
|
|
Art. Nr. 5525 5535 |
Size of Delivery Piece Piece |
|