Drainage Elements

Drainage, water retaining and protection mat for large scale extensive green roofs. Made of polypropylene with attached filter sheet. Max. compressive strength > 50 kN/m2. Water storage capacity: 3 L/m2. Weight: approx. 1.0 kg/m2. Height: 20 mm.

Drainage and water retaining element for extensive green roofs made of recycled polyethylene, with water retaining troughs and openings for ventilation and evaporation, as well as a multidirectional drainage channel system. Bitumen resistant - Max. compressive strength > 270 kN/m2. Water storage capacity: 3 L/m2. Weight: approx. 1.7 kg/m2. Height: 25 mm

Drainage and water retaining element for extensive and semi-intensive green Roofs. Made of recycled polyethylene, with water retaining troughs and openings for ventilation and evaporation as well as a multi directional drainage channel system. Bitumen resistant - Max. compressive strength > 135 kN/m2. Water storage capacity: 6 L/m2. Weight: approx. 2.2 kg/m2. Depth: 40 mm.

Multifunctional drainage and water retaining element intensive roof gardens made of thermoformed recycled polyolefin, with water retaining troughs and openings for ventilation and evaporation as well as a multidirectional drainage channel system. Bitumen resistant - Max. compressive strength > 192 kN/m2 (filled up). Water storage capacity: 13 L/m2. Weight: approx. 2.2 kg/m2. Height: 60 mm.

Drainage, water retaining and protection element Aquatec ® AT 45 specifically designed for the "Lightweight Lawn" green roof system. Made of recycled ABS including clips for drip irrigation. Water storage capacity: 17 L/m2. Weight: approx. 2.00 kg/m2. Height: 45 mm.

Drainage and anti-erosion element for sloped extensive green roofs. Made of expanded polystyrene; with deep profiles to provide a secure hold for the growing medium against slippage (erosion) as well as a multidirectional drainage channel system on the underside and openings for ventilation and evaporation. Produced without CFC's. Height 75 mm. Fill capacity: 25 L/m2. Weight: approx. 1 kg/m2.

Drainage and water storage element made of expanded polystyrene with water storage cells and diffusion openings. Height: 50 mm. Compressible strength at 10% compression approx. 45 KN/m2. Water storage capacity: 3 L/m2. Weight: 0.6 kg/m2. Density: 20 kg/m3.

Anti-erosion element for steep sloped extensive green roofs. Made of polyethylene (HD-PE) including reinforced T-profile in the middle to provide a secure hold for the growing medium against water and wind erosion. Height 100 mm. Weight: approx. 1.8 kg/piece. Quantity: 2.56 pc/m2. Dimensions: 540 mm x 540 mm.

Dimple board drainage mat made of polyethylene, with attached filter sheet on one side; for structural elements in the ground or for soil covered elements; with drainage channels in various directions for unhindered water drainage; usable as drainage and protection layer under terraces, as protection for the foundation wall or protection of the perimeter insulation; pressure-resistant; compressive strength ca. 315 kN/m2; number of studs ca. 3000/m2; Weight:1.4 kg/m2; Height: 12 mm

Heavy duty drainage and protection mat for intensive roof gardens and parking decks. Made of polypropylene with attached filter sheet. Max compressive strength > 500 kN/m2. Weight: approx. 1.5 kg/m2. Height: 20 mm. Minimum bedding material height: 150 mm.

Heavy duty drainage and water retaining element for intensive roof gardens and parking decks. Made of polystyrol. Developed for Inverted roofs. Extremely Stable. Max compressive strength > 500 kN/m2. Including edge connector. Weight: 3 kg/m2. Height: 32 mm.

ZinCo heavy-duty drainage and protection element Protectodrain® PD 250 for parking decks. Made of ABS plastic with attached rubber protection mat and lateral step joint. Resistant to heavy loads and spade damage. Compressive strength at 10% compression: approx. 250 kN/m2. Weight: approx. 5 kg/m2. Height: 25 mm. Stud height: 20mm.

Heavy-duty drainage and protection element made of non-rotting compressed vulcanized rubber with one sided studded structure for parking and plaza decks. Resistant to heavy loads and spade damage. Engineered and tested to counter vehicular forces. Compressive strength at 10% compression: approx. 400 kN/m2. Weight: approx. 14 kg/m2. Height: 19 mm. Stud height: 12 mm. Number of studs per m2: 1200/m2.

Water Retention spacer designed for Blue Roof application. Made of thermoformed recycled polyolefin. Specifically manufactured as spacer for stormwater management roofs. Height: 60 mm. Compressive strength: approx. 40 KN/m2. Creates an additional 55 L/m2 storage capacity. Weight: 2.2 Kg/m2.

Heavy Duty spacer element specifically designed for Blue Roofs. Made of polypropylene with high compressive strength. Height: 65 mm or 100 mm. Compressive strength: 50 ton/m2. Creates an additional 60 L/m2 (RSX 65) or 95 L/m2 (RSX 100) of storage capacity. Weight: 2.4 kg.m2 (RSX 65) or 2.6 kg/m2 (RSX 100).