Solar & Green Roofs

Solar base made of recycled ABS-plastic. Designed as base for the solar base frame SGR - 35/90. Including aluminum reinforcement. Height: approx. 40 mm. Fill volume: approx. 16 ltr/m2. Weight: approx. 7 kg. Element size: approx. 1.00 x 2.00 m.

Solar base racking frame made of aluminum. Designed as frame for photo-voltaic panels. Standard angle 25°, 30° or 45°. Other angles possible on request. Height: 350 / 900 mm. Weight: 2.7 kg/piece. Wind bracing designed for approx 1.00 m spacing.

Structurally tested solar base frame made of two-piece aluminium. Allows for continuous height adjustment of the Solar Base Frame of up to 210 mm. The inclination of 30° can be adapted up to ± 2°. These properties guarantee an optimal adjustment to changing roof slopes and the best possible alignment of solar panels.

Mounting Profile made of extruded aluminium, natural AlMgSi 0.5, mill finish, with profile channel on the upper side, including connectors with screws.

Solar adapter profile fabricated from one piece, allows for the installation of particularly large modules. Installation with at least 2 screws per profile. The contact surface to the Base Frame needs to be at least 250 mm long, so the adapter profiles stick out up to 450 mm.

Solar base racking frame made of aluminum. Designed as frame for photo-voltaic panels. Standard angle 5°-20°. . Height: 350 mm. Length: 1900 mm. Weight: 4.0 kg/piece. Wind bracing designed for approx 1.00 m spacing.

Two pre-punched aluminium profiles for crosswise stabilization of two Solar Base Frames (distance 1.0 m); incl. stainless steel screws.